J-HV-PC-S-W30012T40001
Poly-Cotton T400 Stretch Workwear Fabric with Twill Construction
A polyester-cotton two-way stretch fabric incorporating T400 polyester, with twill construction and WR treatment, developed for professional workwear and selected high-visibility garment applications.
- Composition
- 55% polyester, 35% T400 polyester, 10% cotton
- Weight
- 270–280 gsm (±5%)
- Usable Width
- 148 cm
- Construction
- Twill
- Treatment
- WR
- Care Instructions
- T400 Polyester Two-Way Stretch
- Poly-Cotton Twill Construction
- High-Visibility Colour Test Evidence
- Water Vapour Resistance: Ret < 5
- WR Treatment
Overview
This poly-cotton workwear fabric combines T400 polyester with a twill construction and two-way stretch, offering a material option for professional garments where flexibility and fabric strength are important selection considerations. Its 270–280 gsm weight makes it relevant to workwear designs requiring a moderately substantial woven fabric.
The fabric is supported by documented mechanical, dimensional stability and colour-fastness test results, alongside high-visibility colour testing. It can be considered for industrial workwear and selected high-visibility garment projects, with final suitability depending on the chosen colourway, garment construction and applicable end-use requirements.
Performance & Standards
This fabric has documented test results covering mechanical strength, dimensional stability, colour fastness and water vapour resistance. The technical data sheet also records high-visibility colour performance assessments under EN ISO 20471:2013+A1:2016.
Key Test Results
| Property | Test Method | Reported Result |
|---|---|---|
| Tensile Strength | EN ISO 1421:2016 / EN ISO 13934-1:2013* | Warp: 1870 N; Weft: 750 N |
| Tear Strength | EN ISO 13937-2 / EN ISO 4674-1:2003* | Warp: 85 N; Weft: 50 N |
| Dimensional Stability After Washing | EN ISO 6330 | Warp and weft: reported as <±3% after 5 washes with tumble drying at 40°C/60°C |
| Colour Fastness to Washing | EN ISO 105-C06:2010 | Grade 4 |
| Colour Fastness to Perspiration | EN ISO 105-E04:2013 | Grade 4 |
| Colour Fastness to Hot Pressing | EN ISO 105-X11:1996 | Grade 4–5 at 110°C |
| Colour Fastness to Rubbing (Dry) | EN ISO 105-X12:2016 | Grade 4 |
| Water Vapour Resistance | EN ISO 11092 | Ret < 5 m²·Pa/W |
| High-Visibility Colour Coordinates and Luminance | EN ISO 20471:2013+A1:2016 | Reported conformity: as new, after 25 washes and after xenon exposure |
Testing Notes
The TDS lists alternative test methods for tensile and tear strength without specifying which method produced each result. Washing-temperature applicability and tested high-visibility colourways require confirmation. Abrasion resistance, pilling and hydrostatic-head results are not reported. References to EN ISO 20471 and OEKO-TEX STANDARD 100 do not establish current product certification or finished-garment compliance.
Applications
Potential Applications
- Industrial Workwear Trousers — For workwear designs requiring a woven poly-cotton fabric with two-way stretch.
- Work Jackets and Uniforms — For professional garments where twill construction, fabric strength and movement flexibility are relevant selection factors.
- Workwear Sets — For coordinated jackets and trousers developed around consistent fabric specifications.
- High-Visibility Workwear — For selected garment projects requiring high-visibility colour performance, subject to confirmation of the tested colourway and finished-garment requirements.
Suitability Notes
This fabric is a candidate material for professional workwear development, rather than a guarantee of suitability for every working environment. Buyers should confirm colourway-specific high-visibility performance, required garment design and applicable end-use standards. WR treatment should not be interpreted as a waterproof rating. Sample evaluation and garment-level validation are recommended before bulk production.
Take the Next Step with This Fabric
Request a fabric sample or technical documentation to support your material evaluation.